home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 18
/
QRZ Ham Radio Callsign Database - Volume 18.iso
/
modfiles
/
pagers.txt
< prev
next >
Wrap
Text File
|
2001-11-01
|
5KB
|
110 lines
Subject: BRAVO pagers - undocumented test features
This information was copied from an article posted in rec.ham.radio in
August 1991. This article may not answer many of the questions that
were asked by the original poster, however, it may be useful to some
of you on usenet. The author of this information is unknown. I saved
this information because I have a BRAVO pager and found these tidbits
of information useful.
~jack_
.........................Begin recorded message..........................
IF YOU HAVE A MOTOROLA BRAVO PAGER THIS WILL HELP YOU WITH
SOME OF THE FEATURES OF THIS UNIT YOU MY NOT KNOW ABOUT.
SELF TEST:
TO PUT UNIT INTO A SELF TEST TURN OFF PAGER. NOW HOLD DOWN THE
GRAY ARROW KEY AND BLACK LOCK KEY AT THE SAME TIME AND TURN ON
PAGER. THIS TELLS THE CPU IN PAGER TO GO INTO A SELF TEST. YOU WILL
GET A 2 SECOND LONG BEEP, RELEASE THE GRAY & BLACK BUTTON AND PUSH
THE GRAY BUTTON BEFORE THE 2 SECOND BEEP ENDS. IF YOU DID ALL THIS
IN TIME YOU WILL HAVE "SPL" OR "PAGING P?" AND NOT THE DOTTED LINE
YOU ARE USED TO SEEING WHEN YOU TURN ON PAGER . BY PRESSING THE
GRAY KEY IT WILL GO TO A DISPLAY TEST, PRESS AGAIN AND YOU WILL GET
THE PAGERS CAPCODE (CAPCODE IS THE UNIQUE SERIAL NUMBER WHICH THE
PAGING TRANSMITTERS TRANSMITS TO YOUR PAGER TO TURN ON YOUR PAGER
WHEN SOMEONE PAGES YOU). WAIT AND IN ABOUT 3 SECONDS IT WILL
DISPLAY YOUR SECOND CAPCODE (IF YOU HAVE ONE-MOST DON'T) PRESS THE
GRAY KEY AGAIN AND IT WILL CHECK CONTROLS, PRESS IT AGAIN AND IT
WILL TEST VIBRATOR FUNCTION (IF YOUR PAGER HAS IT). TURN OFF PAGER
AND TURN ON AGAIN TO DISABLE SELF TEST.
SPECIAL PROGRAMMED FEATURES:
TAKE OFF BATTERIES CLIP AND IN CENTER TOWARD THE FRONT OF
PAGER YOU WILL SEE A PRINTED CIRCUIT BOARD EDGE PINS (JUST LIKE THE
BACK SIDE OF A NETENDO CARTAGE. THIS EDGE PINS ARE PLUGGED INTO A
CORE PROGRAMMER. THE PROGRAMMER CAN CHANGE.
CAPCODES: SEE ABOVE
AUTORESET TO MANUAL: YOUR PAGER IN AUTORESET WILL BEEP 8 TIMES
THEN STOP BEEPING. MANUAL RESET THE BEEPER WILL KEEP BEEPING TILL
THE COWS COME HOME OR YOU PUSH A BUTTON TO LOOK AT THE MESSAGE.
DISPLAY: ENGLISH PROMPTS OR INTERNATIONAL-SYMBOL SCREENS
DISPLAYED.
SILENT MODE CHIRP: FOR A SINGLE BEEP WHEN YOUR PAGED. NOT FOR
USE ON VIBRATOR PAGERS.
BEEP ON BAD DATA: YOUR PAGER HEARS IT'S CAPCODE BUT RECEIVED
BAD DISPLAY MESSAGE, IT WILL PUT "EEE" ACROSS DISPLAY TO SHOW BAD
RECEIVE. IF THIS IS FEATURE IS NOT ENABLED AND YOU RECEIVE BAD DATA
YOUR PAGER WILL NOT BEEP AND YOU WILL HAVE NO IDEA SOMEONE TRYED TO
PAGE YOU.
******************************************************************
NOW LETS SAY YOU ARE UNHAPPY WITH YOUR PAGING COMPANY "A" BUT OWN
YOUR PAGER. YOUR $200.00+ PAGER IS TUNED TO THEIR FREQUENCY AND YOU
WANT TO GO TO ANOTHER PAGING COMPANY BUT NOT LOSE ALL THE MONEY YOU
SPENT FOR YOUR PAGER. THE ANSWER IS TO RECRYSTAL PAGER TO THE NEW
FREQUENCY OF COMPANY "B". BUT WE MUST ANSWER SOME QUESTIONS FIRST
TO SEE WHAT IT WILL COST.
1. WHAT IS YOUR PAGERS CODING FORMAT (POCSAG) OR (GSC)
THE EASY WAY TO TELL IS TO DO A SELF TEST AND READ
CAPCODE. IF IT'S 7 NUMBERS IT'S POCSAG. IF IT'S 6 NUMBERS
AND 1 LETTER IT'S GSC. IF YOUR PAGER DOES NOT MATCH THE
SAME CODING FORMAT AS COMPANY "B" IT WILL COST MORE THEN
IT'S WORTH TO CHANGE.
2. WHAT BAUD RATE IS YOUR PAGER WORKING AT ? DO SELF TEST AND
IF DISPLAY SHOWS PAGING P1 PAGER IS WORKING AT 1200 BAUD OTHER WISE
YOU ARE SAFE TO ASSUME 512 BAUD IT MUST MATCH COMPANY "B" BAUD RATE
TO BE WORTH YOUR TIME.
3. ARE YOU IN THE SAME FREQUENCY BAND 931 MHZ OR 450 MHZ ETC.
IF COMPANY "A" AND COMPANY "B" ARE NOT IN SAME BAND IT WILL TAKE A
NEW RECEIVER BOARD TO CONVERT PAGER AND COST TO MUCH TO TRY.
IF ALL THE ANSWERS ABOVE SHOW YOU ARE COMPATIBLE YOU CAN CALL
COMPANY "B" AND TELL THEM YOU WANT TO DO BUSINESS WITH THEM AND
NEED A CAPCODE NUMBER SO YOU CAN GET PAGER RECRYSTALED AND HAVE A
CAPCODE PROGRAMMED AT THE SAME TIME.
NOW YOU CAN HAVE COMPANY "B" RECOMMEND A SHOP THAT WILL
RECRYSTAL PAGER OR LOOK UP ONE YOURSELF.
THE LEAST EXPENSIVE I HAVE FOUND IS:
ECONO-COMM
3710 N.W. 16TH ST.
LAUDERHILL, FLA. 33311
305-581-4980
305-581-4985
LAST TIME I CHECKED RECRYSTAL OF PAGER COST $19.00 AND REPAIR COST
OF $16.00 WITH A 30 DAY WARRANTY. BUT PRICES ARE ALWAYS CHANGING SO
CALL FIRST BEFORE YOU SEND ANYTHING, AND MAKE SURE YOU INSURE PAGER
IN SHIPPING.
Copied from the QRZ! Windows Ham Radio CDROM